<<<Back
  Technical Specifications:
 
 Radial Drilling Machine 

radial drilling machines
 
  WDM-32A WDM-32B WDM-40B WDM-40C WDM-50B WDM-50C WDM-65B WDM-75B
Drill Head
Drilling Capacity
(In Steel/ Cast Iron)		 32/40 32/40 40/50 40/50 50/60 50/60 65/75 75/85
Drilling Depth 140 140 180 180 225 250 325 355
Taper Spindle Nose Socket MT-3 MT-3 MT-4 MT-4 MT-5 MT-5 MT-5 MT-6
No. Of Spindle Speeds/ Range (RPM) 6 (72-1000) 6 (72-1000) 6 (55-665) 12 (56-1000) 9 (45-695) 12 (45-1000) 12 (18-810) 12 (18-810)
No. Of Spindle Speeds/ Range (MM/REV.) 2 (0.1 et 0.2) 2 (0.1 et 0.2) 3 (0.1-0.2) 3 (0.1-0.2) 3 (0.1-0.2) 6 (0.125-1.25) 6 (0.125-1.25) 6 (0.125-1.25)
Drill Power 1.5 Kw. 1.5 Kw. 1.5 Kw. 2.2 Kw. 2.2 Kw. 3.7 Kw. 3.7 Kw. 5.5 Kw.
Capacity
Drilling Radius
MAX.(A) 750 750 1050 1050 1100 1300 1700 1900
MIN. (B) 350 350 375 375 450 450 500 600
 
Drilling Head Traverse
(C) 400 400 675 675 650 850 1200 1300
Distance Base Plate to Spindle
MAX.(P) 835 835 1000 1000 1300 1300 1500 1750
MIN. (M) 225 275 225 225 225 325 300 400
Distance Of Column Sleeve
(D) 190 190 255 255 310 310 355 405
Working Surface  Of the Base Plate GxH 750x650 750x650 900x680 900x680 920x830 1120x830 1500x1020 1850x1160
Dimensions Of the Base Plate Length x Width x Height (TxUxV)
1170x670x 160 1170x670x 160 1480x700x 200 1480x700x 200 1585x850x 200 1800x850x 200 2265x1040x 225 2650x1180x 225
Arm Elevator Motor 0.75 Kw. 0.75 Kw. 0.75 Kw. 0.75 Kw. 1.5 Kw. 1.5 Kw. 2.2 Kw. 3.7 Kw.
Standard Box Table (XxYxZ) 400x350x 350 400x350x 350 400x350x 350 550x420x 420 550x420x 420 550x420x 420 600x500x 500 600x500x 500
Approx. Weight Of Machine 1000 Kgs. 1100 Kgs. 1700 Kgs. 1850 Kgs. 3000 Kgs. 3500 Kgs. 4800 Kgs. 6500 Kgs.
 

Karam | About karam | Products Karam | Karam Gallery | Floor Boring Machine | Shearing Machines | All Geared Lathe Machine | Radial drill Machine | Contact Karam